Aluminum Flood Barrier Prices: US$499–6,669 per Square Yard

Eudore’s 47.24-inch standard aluminum flood barrier model is priced at US$499 per square yard. Eudore confirmed this unit rate on October 27, 2026. US$499 is an area-based unit rate, not a flat price for a complete doorway or garage barrier. For the agreed billable dimensions, calculate the area in square yards and multiply it by the rate for the selected model. Confirm the supplied components and services in the order documents.

Consumers already ask this question. In a public residential flood-protection discussion, a homeowner asks whether systems are available for private homes and small businesses, and how much they cost. The method below helps organize the quotation part of that decision. Current prices should come from the offers being compared, rather than an old forum estimate.

How much do Eudore flood barriers cost?

The following four rates show Eudore’s flood barrier cost per square yard, confirmed on October 27, 2026. All prices are in U.S. dollars per square yard. The product range and configuration determine which rate applies.

The 78.74-inch boundary appears in two product ranges, so identify the selected product and complete configuration when requesting a price. For the automatic gate, confirm the actual project height and equipment with the quotation.

What does a flood-barrier price actually cover?

The four figures above are area-based product unit rates. Calculate the corresponding product amount from the agreed billable area, then check which components and services the order includes. Keep the product amount and any complete installed-project total clearly identified.

Review Eudore’s pricing and quotation terms alongside the written offer. Ask the accepted quotation or order confirmation to record the billable dimensions, selected model, applicable unit rate and included components and services. The four rates above provide the dated product-price reference for this guide.

Before comparing, identify the exact product and the opening it covers. Record the width, height reference, mounting arrangement, posts and supports, finish, destination and currency. Record any configuration-specific pricing changes explicitly in the quotation.

How do I calculate the area in square yards?

Use the rectangular frontal area of the specified barrier, rather than the garage floor area or the length around the property. NIST’s Handbook 44, general measurement tables, gives the customary and metric unit relationships used here.

• Dimensions in inches: width × height ÷ 1,296 = square yards.
• Dimensions in feet: width × height ÷ 9 = square yards.
• Area in square meters: square meters ÷ 0.83612736 = square yards.

These are arithmetic product-price examples using the confirmed standard-model rate. They are not customer orders or recommendations for your opening. The calculation does not establish which delivery, installation or other services are included in a particular order.

For example, 72 × 47.24 ÷ 1,296 × US$499 = US$1,309.60 after rounding. Keep unrounded area values for the calculation and round the product amount at the end. For multiple openings using the same rate, add the individual billable areas before multiplying. If the openings use different model rates, calculate each amount separately and then add the amounts. Ask how the supplier defines billable width and height: clear opening dimensions, supplied panel dimensions and a supplier’s pricing dimensions need not be interchangeable.

How do I convert the quoted unit rate?

Convert only after confirming the currency and included scope. The following relationships apply to area-based rates; they do not add freight, tax, posts or installation to an incomplete quotation.

• Price per square foot × 9 = price per square yard.
• Price per square meter × 0.83612736 = price per square yard.
• Price for the agreed scope ÷ its area in square yards = an effective price per square yard for that scope.

For the standard model, US$499 per square yard is equivalent to approximately US$55.44 per square foot or US$596.80 per square meter on the same product-price basis. These conversions do not change the included scope.

A price per linear foot cannot be treated as a price per square foot. First establish the barrier height and what the linear rate includes. Currency conversion is a separate step: use the same currency and conversion date when comparing international quotations.

How do I compare a complete project budget?

Keep two totals if necessary: the barrier supply and the complete project. Divide each by the same area and label the results separately. An installed-project rate should never be compared with a panels-only rate as though the scope were identical.

Use Eudore’s shipping policy together with the destination-specific written quotation. If requesting a DDP quotation, ask it to name the delivery place and record the delivery and destination-charge scope, plus any unloading or installation services. Avoid adding freight or charges a second time when the accepted price already includes them. Confirm optional services separately instead of interpreting a shipping headline as an all-inclusive installed price.

Does the lowest square-yard rate mean the best value?

No. Area normalization does not establish equal suitability. Compare the same opening, protection requirement and documented configuration before comparing rates. A smaller height or an omitted support can change the quotation without meeting the original requirement.

FEMA Technical Bulletin 3, section 6.3.1, describes the need for a continuous flood-shield load path through mounting systems to walls and foundations. This is general non-residential guidance, not an approval of a particular home installation. Its relevance to a purchase is that support and fixing details belong in the comparison.

Use the Eudore quality guide to compare the scope of material records, calculations and water-test evidence. A unit-price calculation cannot replace those documents or the assessment of the existing building.

What should I send to get a useful quotation?

Send an opening schedule with a separate reference for each doorway or garage. Include the actual opening width, requested height and reference level, mounting-surface photographs, available space for supports, delivery address with postal code and required timing. Ask the supplier to identify the billable dimensions separately.

Please quote the same opening dimensions and protection requirement shown in my schedule. Identify the billable area, price basis, currency, included supports, installation scope, shipping and destination charges. Please list exclusions and confirm the documents applicable to the proposed configuration.

Explore custom aluminum flood barriers or review the measurement and installation manual before preparing the schedule. Then request an opening-specific quotation from Eudore.

Flood barrier pricing questions

Is US$499 the price of a complete flood barrier?

No. It is the confirmed unit rate per square yard for the 47.24-inch standard model. At that rate, an agreed billable area of 2 square yards gives a product amount of US$998. The written order must still identify the supplied configuration and included services.

Can I calculate my final price from the opening area alone?

You can calculate the standard product amount using the confirmed unit rate and agreed billable area. The complete order still needs to state the selected configuration and included components and services.

Does the same unit rate apply to every model?

No. Eudore confirmed US$499, US$899, US$1,299 and US$6,669 per square yard for the four models listed above. Select the applicable product and configuration before multiplying by area.

When were the product prices confirmed?

Eudore confirmed these four product unit rates on October 27, 2026. They are Eudore prices for the stated models. Check the applicable current quotation when ordering later.