Call+1 239 251 1173
Call+1 239 251 1173
Is your garage or home entrance ready for the next flood? Order one custom Residential Flood Barriers for Homes system and protect vulnerable openings from floodwater for years instead of relying on disposable sandbags.
Opening-specific protection for garages, doors and commercial entrances
A reusable, modular aluminum stop-log flood barrier. Permanent side posts are installed once on each side of your opening. When flooding is expected, you slide stackable aluminum planks into the posts and lock them down to form a watertight barrier — then remove and store them when the water recedes.
Each system is custom-made for your exact opening and designed for fast deployment after the one-time post installation. This supports custom flood barriers for homes planning for the right opening.
This system is designed for opening-specific flood protection.Side posts remain discreetly installed. The aluminum planks are removed and stored when flood protection is not needed.
Custom-width flood protection for single, double and wider garage openings while keeping normal access when the panels are stored.
Garage doors, driveway entrances and low garage thresholds.
Permanent side posts, stackable planks and center support where required.
Removable protection for front doors, side entrances and recessed thresholds without blocking normal access between flood events.
Front doors, side entrances, basement doors and recessed thresholds.
Posts and sealing surfaces designed around the existing jamb and floor condition.
Secure wide glass openings while preserving normal access when the removable panels are stored.
Patio doors, French doors, poolside access and wide glass openings.
Opening-specific posts and seals matched to the threshold and surrounding frame.
Opening-specific flood protection for ground-floor retail, service entrances and customer-facing access points.
Retail entrances, service doors, glass fronts and loading areas.
Custom posts, supports and deployment access planned around business operations
Protect large warehouse and loading openings with a configuration planned around the opening schedule and installation conditions.
Warehouse doors, loading docks, service entrances and large openings.
Modular panels with center supports and a coordinated installation plan.
Coordinate protection for lobbies, garages, equipment rooms and other vulnerable openings across a commercial property.
Multi-opening properties, lobbies, parking areas and equipment rooms.
One coordinated review covering opening sizes, heights, supports and deployment planning.
Share the opening type, width, target height or photos when you are ready.
The removable planks are stored when the opening is used normally. Before a flood event, they are inserted into the permanent posts and locked against the sealing surfaces.
Send the clear width, target height, installation surface details and photos for a preliminary configuration review.
The permanent components are installed once. Initial installation is typically about 1–2 hours, depending on the site
Insert the removable planks, engage the internal compression system, then remove, clean and store them after the risk has passed.
Each recommendation is based on the opening width, target height, mounting surface and required support arrangement.
Removable modular planks are stacked to the required protection height and stored when the opening is in normal use.
Side posts are configured for the actual jamb or wall condition and remain in place after the planks are removed.
Sealing surfaces are designed to reduce water entry when the system is correctly configured and installed.
The internal pressing and locking arrangement keeps the stacked planks engaged with the sealing surfaces.
The published report describes a commissioned performance test for the DSC-095 series under defined flow, wave and static-water conditions.
Sample test
PAS 1188-4 reference
Report issued 2024
| Test | Condition | Reported Result |
|---|---|---|
| Flow | 0.85 m water depth, 30 min | 0.27 L/h/m leakage; 0.53 mm deformation |
| Wave | 1.10 m water depth, 15 min | 0.56 L/h/m leakage; 0.62 mm deformation |
| Static | 1.50 m water depth, 60 h | 0.51 L/h/m leakage; 0.46 mm deformation |
Scope note: these are results for the tested sample under defined conditions. They are not a guarantee for every opening or for an entire building. Final height and performance require configuration and site review.
See how Eudore residential flood barriers for door compare in fit, sealing, deployment speed, storage, and warranty.
| What Matters | Improvised Protection | Standard Thin Panels | Eudore Custom Barrier |
|---|---|---|---|
| Fit | Approximate | Limited standard sizes | Made to the opening |
| Sealing | Gaps are common | Varies by product | Double EPDM system |
| Repeat deployment | Labor intensive | Varies | Typically 3–5 minutes |
| Storage | Bulky or disposable | Reusable | Removable, stackable planks |
| Warranty | None | Often limited | 15 years |
Substantial 6063-T5 extrusion built to resist debris impact and hydrostatic pressure.
Two-way sealing on the planks and posts, designed to reduce seepage as water rises.
An internal compression system clamps planks tight against the seals — tool-light operation.
Surface-treated to resist rust and oxidation — suitable for coastal, flood-prone areas.
Made to your opening, with center columns to extend across wide spans.
*The two videos above are showing efforts to prevent flooding.
See how the Eudore aluminum stop-log system performs under deep-water pressure.
The test demonstrates how stackable aluminum planks, double EPDM seals, and internal compression work together to resist floodwater.
Eudore aluminum flood barriers are produced in our own Shenzhen factory, so you deal with the manufacturer directly — with control over quality, lead times and pricing.
Production Experience
Sets / Year Capacity
Custom Production*
*Where applicable, based on order specifications.
Real residential installations showing how custom Residential Flood Barriers protect garage doors and home entrances across the United States.
Custom removable aluminum flood barrier supplied for a garage opening exposed to floodwater risk.
Installed once. Ready before the water rises.
Removable aluminum flood barriers installed for a residential front door entrance in FL.US.
Installed once. Ready before the water rises.
Aluminum flood barrier system supplied for a vulnerable outdoor residential area near a swimming pool.
Installed once. Ready before the water rises.
Removable aluminum flood barriers installed for a residential door entrance in Florida.
Installed once. Ready before the water rises.
One representative installation from a five-project order, engineered for a non-standard residential door frame with concealed post fasteners and a custom recessed mounting solution.
Installed once. Ready before the water rises.
Custom aluminum flood barriers supplied for home and business flood protection in Naples, FL.
Installed once. Ready before the water rises.
Real U.S. project examples showing custom aluminum flood barriers used for garages, home entrances, storefronts, warehouse openings, windows, and commercial access points.
Eudore aluminum flood barrier for door are manufactured in our own factory and shipped directly to U.S. project addresses. In Florida, dealer/agent support is generally available for site assessment and installation. For customers in other U.S. states, we provide remote measurement guidance, custom fabrication, installation instructions, and factory-direct shipping.
Dealer/agent site assessment and installation support is generally available for Florida customers.
Outside Florida, we guide you through measuring your opening with photos, dimensions, and simple instructions.
Your custom flood barrier is manufactured in our factory and shipped directly to your U.S. address.
Share the opening type, clear width, target height, location and photos if available.
We review the opening condition and recommend the likely posts, supports, height and installation approach.
The quotation should make the configuration, shipping option and included support clear before production.
Production and delivery timing depend on quantity, specifications, destination, customs and the selected shipping method.
After installation, keep the removable panels accessible, labeled and ready for a pre-storm deployment check.
Service should be stated clearly so customers know what happens after they submit an inquiry.
Verified ownerThis is one of the best solutions on the market right now to protect your property against flood water !
Verified ownerWell made product. Overall I’m very satisfied. 4* not 5* because a few details lacking (from shipping issues, minor damage to missing clamps) but I got it all sorted and pleased with end result.
I additionally had custom aluminum shrouds made locally to cover the edges and exposed lag bolts.
I spent $3,800. Very fair value for what you get.
Overall satisfied and would highly recommend. Solid A
Verified ownerVery professional and knowledgeable company. The product is very high quality and well built and functional. Very easy to install. Highly recommended! Thank you!
Verified ownerGreat product!
A flood barrier system is a reusable protection setup designed to block floodwater from entering vulnerable openings such as garage doors, front doors, warehouses, storefronts, parking entrances, and commercial buildings.
Removable panels slide into side posts or channels and press against sealing strips to create a watertight barrier across the opening before heavy rain, storm surge, or flooding.
Yes. Reusable panels are faster to deploy, cleaner to store, easier to reuse, and usually provide a more reliable seal than traditional sandbags.
Yes. Garage doors are one of the most common flood entry points. A custom-sized system can protect the full garage opening before water reaches the door.
The best option is usually a custom removable panel system built to match the exact garage width and required protection height. It should be reusable, strong, corrosion-resistant, and fast to deploy.
Yes. Custom flood protection can be built for front doors, patio doors, French doors, side entrances, basement doors, and other home entry points.
Most residential installations do not require major structural changes. The system protects the opening while keeping the building usable for normal daily access.
Yes. Each system can be manufactured according to the exact opening width, required water protection height, and installation conditions.
The maximum flood protection height can reach up to 4 meters when the system is properly engineered and installed with suitable wall structure, anchors, side posts, and support conditions.
Yes. Heavy-duty configurations can be engineered to stop floodwater up to 4 meters high. For this height, wall strength, anchors, side posts, opening width, and installation conditions must be evaluated.
Yes. The panels can be removed, cleaned, stored, and reused for future storms or flood events.
If installed and maintained properly, a high-quality aluminum panel system can provide up to 15 years of long-term protection.
Yes. Corrosion-resistant aluminum, protective coating, and EPDM sealing strips make the system suitable for coastal areas with humidity, storm surge, and saltwater exposure.
Yes. It can help reduce water entry during hurricane-related storm surge and heavy rainfall. Final performance depends on flood height, wall structure, anchors, and proper installation.
Yes. Installation is very simple for most residential openings, and we recommend that homeowners install it themselves to save installation costs. For structurally complex commercial buildings or very large openings, professional installation is recommended.
The first installation of side posts and ground channels usually takes about 1–2 hours, depending on opening size, wall condition, floor surface, and anchoring requirements.
After the side posts and ground channels are installed, the removable panels usually take only about 3–5 minutes to deploy.
Yes. The removable panels can be taken out and stored compactly, keeping the entrance clear during normal daily use.
Common applications include garage doors, front doors, patio doors, French doors, warehouse entrances, storefronts, loading docks, parking garages, utility rooms, and commercial entrances.
Yes. Modular panels and support posts can be used for warehouse doors, loading docks, service entrances, and large commercial openings.
Pricing starts from $499. The final price depends on opening width, required protection height, installation surface, quantity, and custom requirements.
Production speed depends on quantity and specifications. As a reference, about 100 square meters can usually be produced in around 2 days.
Sea freight usually takes about 35 days. Air freight usually takes about 10 days, depending on destination, customs, and logistics conditions.
Review product specifications, installation guidance, engineering references, brochures, and test reports before choosing the right flood barrier system for your project.
Product specification sheet (PDF)
Step-by-step installation demonstration
Detailed installation instructions
Engineering calculation reference (PDF)
Product overview & key features
Certified performance test results
Send your opening size or photos. We’ll recommend the correct height, post configuration and installation approach—with custom pricing.