$499.00
Final configuration is reviewed before production · Secure checkout · 50-day returns
A reusable, modular aluminum stop-log flood barrier. Permanent side posts are installed once on each side of your opening. When flooding is expected, you slide stackable aluminum planks into the posts and lock them down to form a watertight barrier — then remove and store them when the water recedes.
Each system is custom-made for your exact opening and designed for fast deployment after the one-time post installation.
Stack to the exact height you need, plank by plank.
Two-way sealing engineered for watertight performance.
Installed once and stay discreetly in place year-round.
Made to measure — add center columns for wide spans.
Custom-fit barriers for the entry points where water gets in first.
The widest, lowest opening on most homes — and the first to take on water.
Seal front and side doors before water reaches your floors and walls.
Wide glass openings are vulnerable — custom planks fit them precisely.
Protect ground-floor retail, inventory and finishes from costly flooding.
Warehouse flooding can cause major losses. Aluminum flood barriers help protect your property.
Shield lobbies, garages and equipment rooms across the whole perimeter.
How common options compare on leakage, labor, cost, corrosion, fit and speed.
*Flood protection up to 4m depending on configuration and installation conditions.
Substantial 6063-T5 extrusion built to resist debris impact and hydrostatic pressure.
Two-way sealing on the planks and posts, designed to reduce seepage as water rises.
An internal compression system clamps planks tight against the seals — tool-light operation.
Surface-treated to resist rust and oxidation — suitable for coastal, flood-prone areas.
Made to your opening, with center columns to extend across wide spans.
See how the Eudore aluminum stop-log system performs under deep-water pressure.
The test demonstrates how stackable aluminum planks, double EPDM seals, and internal compression work together to resist floodwater.
Eudore aluminum flood barriers are produced in our own Shenzhen factory, so you deal with the manufacturer directly — with control over quality, lead times and pricing.
Production Experience
Sets / Year Capacity
Custom Production*
*Where applicable, based on order specifications.
Eudore aluminum flood barriers are manufactured in our own factory and shipped directly to U.S. project addresses. In Florida, dealer/agent support is generally available for site assessment and installation. For customers in other U.S. states, we provide remote measurement guidance, custom fabrication, installation instructions, and factory-direct shipping.
Dealer/agent site assessment and installation support is generally available for Florida customers.
Outside Florida, we guide you through measuring your opening with photos, dimensions, and simple instructions.
Your custom flood barrier is manufactured in our factory and shipped directly to your U.S. address.
Homes, businesses and commercial projects protected across the United States.
U.S. Installations
Warranty
Manufacturing
Date: July 25, 2025
location: Florida, USA
Date: Nov 21, 2023
location: BridgeSt, Frenchtown NJ USA
Date: May 6, 2025
location: Florida, USA
Date: Aug 4, 2025
location: STANWOOD, WA USA
Date:Dec 14, 2023
location:SAINT AUGUSTINE, FL USA
Date: Oct 9, 2023
location: Fort Lauderdale, FL USA
Date: May 6, 2026
location: Fort Myers FL, USA
Date: May 16, 2025
location: Brooklyn, NY USA
Date: Sep 5, 2025
location: Kenner, LA, USA
Date: Aug 11, 2025
location: New Rochelle, NY ,USA
Date: July 10, 2023
location: Naples, FL USA
Date: Mar 10, 2026
location: Joppa, MD,USA
Explore practical flood protection guides to compare solutions, understand common flood entry points, and choose the right barrier system for your property.
Compare reusable aluminum flood barriers with sandbags for long-term flood protection.
Read guide →
Learn what type of flood barrier works best for single, double, and custom garage doors
Read guide →
Understand how water enters garages and what protection options can reduce risk.
Read guide →
Explore answers about custom size, installation, sealing, reuse, and commercial applications.
View FAQ →
Review product specifications, installation guidance, engineering references, brochures, and test reports before choosing the right flood barrier system for your project.
Product specification sheet (PDF)
Step-by-step installation demonstration
Detailed installation instructions
Engineering calculation reference (PDF)
Product overview & key features
Certified performance test results
A flood barrier system is a reusable protection setup designed to block floodwater from entering vulnerable openings such as garage doors, front doors, warehouses, storefronts, parking entrances, and commercial buildings.
Removable panels slide into side posts or channels and press against sealing strips to create a watertight barrier across the opening before heavy rain, storm surge, or flooding.
Yes. Reusable panels are faster to deploy, cleaner to store,
easier to reuse, and usually provide a more reliable seal than
traditional sandbags.
Read the full flood barrier vs sandbags comparison.
Yes. Garage doors are one of the most common flood entry points. A custom-sized system can protect the full garage opening before water reaches the door.
The best option is usually a custom removable panel system built
to match the exact garage width and required protection height.
It should be reusable, strong, corrosion-resistant, and fast to
deploy.
Read the full garage flood barrier guide.
Yes. Custom flood protection can be built for front doors, patio doors, French doors, side entrances, basement doors, and other home entry points.
Most residential installations do not require major structural changes. The system protects the opening while keeping the building usable for normal daily access.
Yes. Each system can be manufactured according to the exact opening width, required water protection height, and installation conditions.
The maximum flood protection height can reach up to 4 meters when the system is properly engineered and installed with suitable wall structure, anchors, side posts, and support conditions.
Yes. Heavy-duty configurations can be engineered to stop floodwater up to 4 meters high. For this height, wall strength, anchors, side posts, opening width, and installation conditions must be evaluated.
Yes. The panels can be removed, cleaned, stored, and reused for future storms or flood events.
If installed and maintained properly, a high-quality aluminum panel system can provide up to 15 years of long-term protection.
Yes. Corrosion-resistant aluminum, protective coating, and EPDM sealing strips make the system suitable for coastal areas with humidity, storm surge, and saltwater exposure.
Yes. It can help reduce water entry during hurricane-related storm surge and heavy rainfall. Final performance depends on flood height, wall structure, anchors, and proper installation.
Yes. Installation is very simple for most residential openings, and we recommend that homeowners install it themselves to save installation costs. For structurally complex commercial buildings or very large openings, professional installation is recommended.
The first installation of side posts and ground channels usually takes about 1–2 hours, depending on opening size, wall condition, floor surface, and anchoring requirements.
After the side posts and ground channels are installed, the removable panels usually take only about 3–5 minutes to deploy.
Yes. The removable panels can be taken out and stored compactly, keeping the entrance clear during normal daily use.
Common applications include garage doors, front doors, patio doors, French doors, warehouse entrances, storefronts, loading docks, parking garages, utility rooms, and commercial entrances.
Yes. Modular panels and support posts can be used for warehouse doors, loading docks, service entrances, and large commercial openings.
Pricing starts from $499. The final price depends on opening width, required protection height, installation surface, quantity, and custom requirements.
Production speed depends on quantity and specifications. As a reference, about 100 square meters can usually be produced in around 2 days.
Sea freight usually takes about 35 days. Air freight usually takes about 10 days, depending on destination, customs, and logistics conditions.
Send your opening size or photos and we’ll recommend the right configuration with custom pricing — usually within 24 hours.
