EUDORE / TECHNICAL RESOURCES

Flood Barrier Technical Resources

Find installation guidance, videos, product specifications and published reports for Eudore flood barriers. Start with your product type, then confirm the documents that apply to your opening and required protection height.

01 / FIND YOUR SYSTEM

Which flood barrier are you planning?

A product family or application helps narrow the search. Confirm the actual model, height and support arrangement before relying on a document.

MANUAL ALUMINUM

Removable aluminum plank systems

Start with the manual and published product references. Confirm the supplied model before installation.

Find installation resources → GARAGE APPLICATION

Garage openings

Use the manual-system resources when your garage barrier is a removable aluminum plank system. Review opening width and mounting conditions.

View garage configurations → HIGHER PROTECTION

Up to 78.74 inches

For 55.12–78.74 in configurations, request matching specifications, structural calculations and installation details.

View this height range → HIGHER PROTECTION

Up to 118.11 inches

For 78.74–118.11 in configurations, confirm the project documentation for the selected span, height, posts and supports.

View this height range → AUTOMATIC GATES

Automatic flood protection gates

Request model-specific operating, installation and maintenance instructions. Manual plank-system instructions do not replace these.

Find automatic-gate guidance → NOT SURE?

Identify the right document set

Send the product name or order number, opening dimensions and photos. We can help identify the applicable documentation.

Request a document review →

02 / MEASURE, INSTALL & DEPLOY

Installation manuals and videos

The linked manual covers manual aluminum plank systems. Confirm your supplied model and installation details; video demonstrations support the written instructions.

WEB GUIDE / MANUAL SYSTEM

Measurement & installation manual

Review opening measurement, component checks, post installation and panel deployment.

Read the installation manual → VIDEO / MANUAL SYSTEM

Installation demonstration

Open the existing demonstration to review the assembly sequence. Confirm any differences from your supplied configuration.

Watch the demonstration → VIDEO LIBRARY

Reports and certification documents

These are published reference documents. Read the model, tested dimensions, conditions and results inside each file; their presence here does not establish performance for every product height or configuration.

PDF / TEST RESULTS

Published performance test report

Review the tested assembly and stated test conditions before applying the results to a proposed system.

Open test report → PDF / ENGINEERING REFERENCE

Structural calculation reference

Check the calculation assumptions and covered configuration. Request calculations matched to the proposed height, span, supports and fixing conditions.

Open calculation reference → PDF / MATERIAL TESTING

Mechanical properties report

Review the material designation and tested sample stated in this report. Confirm whether it matches the selected components.

Open mechanical report → PDF / CERTIFICATION

Published CE certificate

Read the named entity, product scope and referenced standards in the document. Request confirmation of applicability to your order.

Open certificate →

04 / PRODUCT REFERENCES

Specifications and product literature

Use these documents to begin a product review. The specification supplied for your confirmed configuration takes priority when components or dimensions differ.

PDF / STANDARD REFERENCE

Product specification sheet

Review the components and dimensions listed in the published specification.

Open specification sheet → PDF / RANGE OVERVIEW

Aluminum flood barrier brochure

An introduction to the product range. Request the current specification for the model you are considering.

Open product brochure →

AUTOMATIC FLOOD GATES

Request instructions for your gate model.

Automatic gates need their own installation, control-system, operation and maintenance documents. Send the gate model or order number so we can identify the appropriate instructions.

View automatic flood gate details →

Request gate documentation

DOCUMENTS FOR YOUR PROJECT

Need a report or installation detail matched to your opening?

For protection heights up to 78.74 or 118.11 inches, request formal structural calculations and installation details for the proposed configuration. A general reference PDF is not a substitute for a matching project document.

Product name or order number, if available.
Clear opening width and required flood protection height in inches.
Photos of the opening, side walls and floor, plus the proposed mounting method.
Project location and any documentation requirements from your engineer or reviewer.

Tell us whether you need a specification, structural calculation report, applicable test evidence or installation guidance. We will review the request and confirm the available documents and any additional information required.

Request technical documents & a quote

Prefer email? [email protected]

COMMON QUESTIONS

Using the technical documents

Does one test report cover every barrier height?

No. A test report describes the sample and conditions stated in that document. Confirm its applicability to the proposed system, including height, span and supports.

Can I use the manual for an automatic gate?

The linked aluminum plank manual is for manual systems. Request the instructions for your automatic gate model.

Can I request project-specific structural calculations?

Yes. Submit your target height, opening dimensions and site information. We will confirm the documentation needed for the proposed configuration.