Aluminum Flood Barriers Up to 118.11 Inches

Home / Aluminum Flood Barriers / 78.74–118.11 in Protection

CUSTOM ALUMINUM FLOOD PROTECTION

Aluminum Flood BarriersUp to 118.11 in.

78.74–118.11 in

Eudore reusable aluminum stop-log flood barriers for protection heights from 78.74 to 118.11 inches. Substantial 3.94-inch-thick panels and supporting posts are configured for your entrance or property boundary.

Get my free quote →Watch the project video

Free project review · Custom dimensions · No obligation

Aluminum flood barrier system with panels, side posts and center supports for protection heights up to 118.11 in
Built as a complete system. Substantial panels, side posts and center supports for higher protection.

Start with your projectMatch the height, opening and support layout to your site.

Up to 118.11 inchesProtection heights from 78.74–118.11 in, configured for your project.
Modular aluminum3.94 in panels with side posts and center supports as required.
Technical guidanceReview the installation details and supporting documentation.

IS THIS THE RIGHT CONFIGURATION?

For projects that need 78.74–118.11 in protection.

Tell us where the barrier will be used. The opening and mounting surfaces determine the final panel, post and support arrangement.

01 / ENTRANCES

Commercial & industrial openings

Plan protection across access points, service entrances and loading areas.

02 / WIDER RUNS

Property boundaries

Review a longer barrier in sections, with center posts and room for supports.

03 / RIVERSIDE SITES

Exposed walkways & frontages

Coordinate the flood boundary with existing structures and everyday access.

Not sure which height you need? Send your site details for a recommendation →

Installed aluminum flood barrier with 94.49-inch protection height beneath a steel canopy
94.49-inch protection height · Covered-facility project

COMPLETED PROJECT · 94.49 INCHES

See higher protection
in a completed project.

An installed aluminum barrier beneath a steel canopy shows how panels and posts form a continuous flood boundary.

This project has a 94.49-inch protection height, within the 78.74–118.11-inch range featured on this page.

  • Stacked aluminum panels form the barrier.
  • Intermediate posts divide the run into sections.
  • Mounting and support details are matched to the site.
Request a similar configuration →
Completed street-side aluminum flood barrier project with 157.48-inch protection height

A HIGHER CUSTOM PROJECT

A completed 157.48-inch barrier.

This street-side project demonstrates Eudore’s experience with taller installed barrier systems.

The pictured 157.48-inch project is a separate engineered configuration. This page covers 78.74–118.11-inch protection heights; taller projects require their own design review.

Discuss a taller project →

PROJECT VIDEO

See an installed Eudore aluminum flood barrier.

See Eudore aluminum flood barriers installed on site. See the finished panels, posts and supports forming a continuous flood barrier. Project footage shows the installed system; the configuration for your site is reviewed separately.

Get my free quote →Open video on YouTube ↗
Installed Eudore aluminum flood barrier project video

THE 78.74–118.11 IN SYSTEM

Panels and posts designed to work together.

A substantial panel profile, 4.72-inch-wide side posts and project-specific center supports form a coordinated system for higher flood protection.

3.94 in thick aluminum flood barrier panel for heights up to 118.11 inches
01 / STACKABLE PANELS

3.94 in aluminum panels

A 3.94-inch-deep panel profile with a 10.63-inch panel height and approximately 0.098-inch aluminum wall thickness. Stackable sections build the specified barrier height.

4.72-inch-wide aluminum flood barrier side post
02 / SIDE POSTS

4.72 in wide side posts

End supports connect the panel arrangement to the opening. Mounting details follow the site layout.

Center post for an aluminum flood barrier system up to 118.11 inches high
03 / CENTER SUPPORTS

Posts for wider runs

Intermediate supports divide longer barriers into sections. Spacing and bracing are determined for the project.

Complete aluminum flood barrier system configured for protection heights up to 118.11 inches
04 / COMPLETE SYSTEM

Configured for higher protection

Substantial aluminum panels, posts and supports are specified as one system for projects requiring protection heights up to 118.11 in.

EVIDENCE WITH CONDITIONS

Review the Reports and Certification—not Just the Headline Claim

The documents include the commissioned DSC-095 performance test, supporting mechanical-properties testing and the CE certificate. Read each document within its stated scope and conditions.

  • Report 202406159 GZU-181
  • 3,000 × 1,600 mm tested sample
  • Opening-specific design still required
01 PDF DOCUMENT

Performance Test Report

Flow, wave and 60-hour static-water test conditions and reported results.

Open document ↗
02 PDF DOCUMENT

Mechanical Properties Testing Report

Supporting mechanical-properties data for the aluminum flood barrier components.

Open document ↗
03 PDF DOCUMENT

CE Certificate

CE conformity documentation for Shenzhen Aodeke Optoelectronics Co., Ltd.

Open document ↗
PRIMARY PERFORMANCE REPORT

Reported DSC-095 Test Results

Three conditions from the commissioned report are summarized here for quick review. Open the original PDF above for the complete test method, sample details and limitations.

Test Condition Reported result
Flow 0.85 m depth · 30 min 0.27 L/h/m leakage · 0.53 mm deformation
Wave 1.10 m depth · 15 min 0.56 L/h/m leakage · 0.62 mm deformation
Static 1.50 m depth · 60 h 0.51 L/h/m leakage · 0.46 mm deformation

Final protection height and performance require opening-specific configuration, suitable structural conditions and correct installation.

For this 78.74–118.11 in system: these are the standard product reports. Read the tested dimensions and water depths above; project-specific specifications and structural calculations must match the proposed configuration. Request a configuration review →

FACTORY-DIRECT

See Where Eudore Flood Barriers Are Made

Eudore works directly with the Shenzhen manufacturing team for aluminum processing, custom dimensions, quality control, lead times and project-specific support.

Eudore customers and distributor team reviewing Eudore systems
TEAM & DISTRIBUTOR SUPPORTProject and system review at Eudore
Customers visiting the Eudore aluminum flood barrier exhibition hall
SHOWROOM VISITCustomers reviewing flood barrier configurations
6 yrs Production experience
120,000 Sets per year capacity
48 hrs Custom production*

*Where applicable, based on order specifications. CE certification, RoHS documentation and third-party test reports are available for review.

CONFIGURATION AT A GLANCE

Specify your height.
Then resolve the details.

From a single entrance to a longer perimeter, the design starts with the water protection level and the structure that will support it.

The deeper aluminum profile gives this system a substantial, heavy-duty construction. Panel weight depends on length and configuration; handling and support requirements are reviewed with your project.

Protection height78.74–118.11 in
Individual panel height10.63 in
Overall panel thickness3.94 in
Aluminum wall thicknessApproximately 0.098 in
Side-post width4.72 in
Barrier widthCustom to the project
Center posts & bracesProject-specific arrangement

FROM MEASUREMENTS TO DEPLOYMENT

Define the flood boundary

Share the opening width, required height, location and clear photographs of the mounting surfaces.

Review posts and supports

Coordinate the panel spans, foundation, wall connections and space for any required braces.

Install and check the system

Follow the approved installation details and check panel alignment, seals and compression.

Prepare for repeat deployment

Plan panel storage and handling, inspect the seals and rehearse deployment before flood conditions arrive.

TECHNICAL RESOURCES

Review the details before you specify.

Explore the standard product documentation and installation guidance as a starting point for your project review.

01 / REFERENCE

Technical specifications

Standard product specification sheet

Open resource ↗02 / REFERENCE

Installation manual

Post positioning, assembly and sealing

Open resource ↗03 / VIDEO

Installation video

Watch the standard system installation

Watch video ↗04 / REFERENCE

Structural calculations

Standard product engineering reference

Open resource ↗05 / REFERENCE

Product brochure

Standard product range and features

Open resource ↗06 / REFERENCE

Test report

Published standard product test results

Open resource ↗

These links currently reference the standard product. The published test report applies to its stated sample and test conditions; it does not by itself establish performance for a 118.11 in configuration. Specifications and structural calculations for the selected project must match the final design.

PROJECT QUESTIONS

Plan your 78.74–118.11 in flood barrier.

Start with the protection height, the opening or boundary dimensions, and the supporting conditions at your site. These answers explain what is shown on this page; the final configuration is reviewed for the individual project.

Can the barrier be configured to 118.11 inches high?

Yes. This system is offered for protection heights from 78.74 in to 118.11 in. The final layout depends on the opening width, supporting structure, fixings and required post or brace arrangement.

What heights do the project photos show?

The covered-facility project is 94.49 inches high. The street-side project is a separate 157.48-inch engineered configuration. Neither photo changes the 78.74–118.11-inch product range offered on this page.

Can it protect a long boundary or a wide entrance?

Yes, the arrangement can be divided into sections using center posts. Share the total length and site details so that panel spans, supports and access can be reviewed together.

What support layout does a 118.11 in flood barrier need?

The support layout is determined from the required height, span lengths, mounting surface, base fixings and available space for posts or braces. A 118.11 in configuration should be reviewed for its own site conditions.

Can the panels be removed between flood events?

Yes. The modular panels can be removed and stored. The installation layout determines which supporting components remain in place.

What information do you need for a quote?

Send the clear width or total run length, target protection height, project location and photos of the floor, walls and available support space. Include drawings if available.

GET A CUSTOM RECOMMENDATION

Tell us about your opening

Share the opening type, clear width, target flood height in inches and location. Our team will review the details and recommend the right configuration.

Guide showing outside-wall and inner-wall flood barrier opening measurements
How to measure

Measure the clear opening width and target protection height. Include the jamb and floor condition in your photos.

Drag & Drop Files, Choose Files to Upload, or Capture With Your Camera